Metals & Alloys

Bering delivers first BC60 aluminium explorer catamaran

The 18.9-metre twin-hull displacement explorer carries more than 13,500 litres of fuel for a range above 3,500 nautical miles at 8 knots.

Priya RaghunathanOctober 26, 20265 min read9 views
An aluminium-hulled explorer catamaran with a twin hull, deep sponsons and an enclosed flybridge, shown at anchor in calm water at dawn.

Bering Yachts has shown the first hull of its BC60, an 18.9-metre aluminium explorer catamaran that carries the builder's long-range displacement approach onto a twin-hull platform. The vessel has been delivered and is already afloat, and founder and chief executive Alexei Mikhailov walked through its design and onboard systems.

Aluminium construction underpins range and autonomy

The BC60 measures 18.9 metres overall, or 60 feet, with an 8.6-metre beam. Bering positions it as a displacement explorer rather than a high-speed production catamaran: the all-aluminium structure, shallow draft and large fuel capacity are all aimed at extended passages and greater autonomy at sea.

Draft is 1.58 metres and fuel capacity exceeds 13,500 litres, which the yard says supports a range of more than 3,500 nautical miles at a cruising speed of 8 knots. Fresh-water capacity is approximately three cubic metres, while the grey-water and black-water tanks hold 1,500 litres each.

Deep sponsons house a two-level engine room

The twin-hull layout is used to create volume for machinery and stores. Unusually deep sponsons contain a two-level engine-room arrangement, giving accessible space for generators, watermakers, sewage-treatment equipment and other systems. Bering says the arrangement also helps isolate noise and vibration from the living spaces, supporting comfort on longer passages. Protected running gear and attention to structural integrity are presented as part of the same safety-oriented approach.

The aluminium construction and the resulting weight distribution also allow a fully enclosed flybridge that functions as a second salon.

Mikhailov framed the project as a transfer of proven design rather than a new departure: the range, reliability, quiet running and self-sufficiency demonstrated on the B72 and B88 were applied to a catamaran platform. “This is not a leisure cat, it is a displacement exploration machine,” he said during the walkthrough. The performance figures are the yard's own.

Accommodation and a flybridge that doubles as a salon

On the main deck, a salon houses a full helm station with 360-degree visibility, with a professional galley arranged on both sides of the space. One sponson holds the master cabin, which has space to walk around the bed, panoramic windows, a walk-in wardrobe and an en-suite bathroom with a full shower. The opposite sponson contains two guest cabins, each with its own bathroom.

A dedicated crew cabin, laundry and pantry areas, additional refrigeration capacity and extensive storage are intended to support long stays aboard, whether the catamaran is owner-operated or run by a small professional crew. Above, the enclosed flybridge adds a bar, refrigeration, a day bathroom and 360-degree visibility, and can be configured as a lounge, gym or office.

Comfort as part of the expedition brief

Bering highlights low sound and vibration levels at cruising speed as central to the BC60's expedition-focused design, alongside the storage and onboard systems meant to sustain self-sufficiency over long passages. The combination of a range above 3,500 nautical miles, shallow draft and all-aluminium construction is presented as marrying long-range explorer requirements with the additional space of a catamaran platform.

The launch and delivery of the first hull mark the point at which Bering's twin-hull explorer concept moves from design principle to a floating vessel, extending the approach established on the B72 and B88 into a new format.