Industrial Machinery

Fives HPM Positions RoboTDM as Robotic Alternative for Large-Part Machining

The Liné Machines RoboTDM combines an industrial robot with a high-precision machining end effector for large-part milling, trimming and drilling where tolerances around 0.1 mm are acceptable.

Roshni IyerOctober 29, 20265 min read10 views
An industrial robot equipped with a precision spindle end effector machines a large curved panel in a clean manufacturing cell, illustrating robotic machining brought to an oversized workpiece.

Fives High Precision Machines (Fives HPM) is positioning its Liné Machines RoboTDM as a high-precision robotic machining system for large workpieces that do not require the full capability of a large CNC machine tool. The system, part of Fives’ Material Removal business line, is designed to bring milling, trimming and drilling directly to components where tolerances down to approximately 0.1 mm are acceptable.

The starting point is a common mismatch between part size and precision requirements. Large components often prompt investment in a large CNC machine, but Fives argues that some applications do not need the accuracy such equipment provides. In those cases, the company says, paying for unnecessary capability can be avoided by using an industrial robot fitted with a specialized end effector incorporating a spindle, toolholder and cutter.

Machining at the workpiece

RoboTDM reverses the usual setup logic. Instead of bringing an entire component into a large machine envelope, it takes the machining capability to the workpiece. Fives says this approach can shorten setup, simplify programming and avoid the cost and footprint of a large CNC machine. The system is intended for operations including metal face milling, deburring castings, trimming excess weld beads, drilling pilot holes in large aerospace panels or automotive body parts, and trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications.

Conventional CNC machining of such parts typically involves substantial setup time and programming. RoboTDM is presented as a way to reduce equipment requirements while delivering productivity gains for suitable applications. The physical flexibility of the robot is particularly relevant when components are too large or awkward to move through a conventional machine tool. The system can be configured with multiple workstations and customized peripheral equipment, and Fives says its relatively modest foundation requirements simplify installation compared with a large CNC machine.

Closing the accuracy gap

Industrial robots have traditionally been limited by positional accuracy. Fives says conventional systems typically achieve tolerances of around 0.3 mm, which is insufficient for many machining applications. The RoboTDM development program therefore focused on high-precision robotic machining (HPRM), using robot calibration techniques together with advanced look-ahead and motion-planning algorithms.

According to Fives, these algorithms allow the processing of programs containing more than one million points without the latency that can otherwise compromise robot motion. The result is smoother trajectory execution that supports multi-axis contouring and complex machining operations in a way more closely comparable with CNC machining. Fives says RoboTDM can reduce machining deviation by up to 100 μm, or 0.1 mm, representing a threefold improvement over conventional robotic accuracy.

That improvement defines the application window. RoboTDM is intended for work where tolerances down to approximately 0.1 mm are acceptable. Fives explicitly does not present the system as a solution for every machining challenge: where tolerances tighter than 0.1 mm are necessary, a high-precision CNC machine remains the appropriate choice. In this respect, RoboTDM is complementary to Liné Machines’ and the wider Fives HPM portfolio of high-precision machine tools.

Configuration and process options

The machining end effector can be configured with different spindle sizes, power ratings, torque and speed according to the task. Available systems can provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also incorporate automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling applications.

Machining is not the only process the platform can accommodate. Fives says RoboTDM systems are also configurable for waterjet cutting, laser profiling and ultrasonic cutting. This extends the robot’s role beyond material removal and reflects the system’s intended use as a flexible production tool for large or awkward components.

Trials, markets and manufacturing

Fives cites an R&D project and development trials spanning several years that demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. Those results are presented as development findings for suitable applications, not as a universal performance guarantee. The technology addresses a manufacturing question that Fives frames simply: whether an application actually requires a large CNC machine, or whether it requires a reliable and accurate way to put a cutting tool in the right place.

Fives sees particular potential in aerospace, defense, maritime and energy, where component dimensions can be substantial and production requirements vary considerably. The company describes RoboTDM as another interpretation of its “precision at scale” cross-brand mantra, with scale meaning a smarter way to manufacture large components while applying the accuracy level the application demands. The Liné Machines brand contributes expertise in large-scale milling and material-removal processes.

Fives says the development of RoboTDM originated directly from customer requirements and reflects an approach of engineering solutions around specific manufacturing challenges rather than forcing applications to fit standard equipment. Fives Liné Machines Inc., now part of Fives HPM, has had a presence in North America for almost 50 years through its facility in Granby, Quebec, Canada. The plant produces Liné CNC machine tools and robotic solutions, including RoboTDM, and the site provides support activities including engineering, integration, automation, service and training across equipment lifecycles.

For manufacturers with the right component, Fives says RoboTDM can offer an option between conventional robotics and the cost of a large CNC machine tool, with lower capital investment, simpler installation, greater flexibility and substantially shorter cycle times. The central constraint remains accuracy: the system is aimed at large-part work where approximately 0.1 mm is sufficient, while tighter work stays with high-precision CNC equipment.