KraussMaffei Extrusion has developed PVC InlineMixing, a single-stage continuous extrusion process for PVC roofing membranes. The system is designed to replace the conventional two-stage route in which a separate hot-cold mixer produces a dryblend that is cooled, stored and later plasticized in a twin-screw extruder. According to the company, the new process reduces energy costs, shortens production time and can support a rapid return on investment. It is already in use on an industrial roofing-membrane production line.
In the traditional route, PVC powder, plasticizers, additives and fillers are processed batchwise in a hot-cold mixing combination. The resulting dryblend must then be cooled and held in intermediate storage before it is fed to a twin-screw extruder and formed into membranes. This creates separate mixing, logistics and storage steps before extrusion begins.
Direct feeding replaces dryblend preparation
PVC InlineMixing removes the separate mixing stage. All solid and liquid components are fed directly into the extruder through gravimetric dosing systems in the required proportions. The material is heated only once, and KraussMaffei says energy consumption and energy costs can be reduced by up to 75 percent compared with the two-stage process. The company notes that the actual saving depends on the formulation, system parameters and location.
The company also cites lower capital and operating costs. Manufacturers do not need to invest in a separate heating-cooling-mixing combination, and the elimination of that equipment reduces the space required for the overall system. Labor requirements are described as significantly lower than for a system using dry-blend premixing. Maintenance costs are also expected to be lower because wear parts for the heating-cooling mixer are no longer needed. KraussMaffei links the combination of lower capital expenditure and lower operating costs to improved overall cost-effectiveness and the conditions for a quick return on investment.
Formula changes during operation
The continuous process is also presented as more flexible. Formula adjustments and color changes can be made directly during operation through the integrated control system, according to the company. This avoids the time-consuming preparation and intermediate storage of separate dryblend batches. As a result, manufacturers can respond more quickly to new requirements and adjust formulations within the running production process while reducing energy and capital expenditure, according to Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion.
The process was developed at the KraussMaffei Extrusion Technology Center in Laatzen and tested with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, equipped with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing formulation ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume provides a wide process window for different formulations.
KraussMaffei reports that the tests confirmed good gelation of the PVC and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations. The company says customers can test their own formulations under production-relevant conditions at the Technology Center, optimize the process and prepare for industrial implementation.
Industrial reference line
PVC InlineMixing is already running in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders and reaches a total throughput of 1,800 kg/h. In this configuration, PVC, additives and fillers, together with the resulting edge trimmings, are processed continuously into finished membranes. KraussMaffei presents the process as a way to combine high product quality with a leaner production route, making PVC roofing-membrane manufacturing more cost-effective and flexible.
