SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor designed for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The product extends the company’s SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required.
Wide spot addresses surface-related signal noise
Conventional point-spot laser displacement sensors concentrate reflected energy on a small area. According to SinceVision, this makes readings vulnerable to microscopic scratches, grain boundaries, brushed textures and matte finishes. Those features can create signal variations that the system may interpret as dimensional changes, potentially triggering false defect warnings and additional inspection.
The SGI-N030W instead uses an expanded laser spot and optical triangulation. By collecting reflected light over a broader area, it averages local microscopic peaks and valleys before signal conversion, reducing the influence of surface roughness and optical scattering. SinceVision says the approach provides more stable displacement measurements on drawn metals, sandblasted surfaces and coated battery foils.
Measurement specifications
The sensor has a 30 mm reference distance and a ±5 mm measurement range. SinceVision specifies repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes.
Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition, measuring from either side of a component or moving material.
Inline thickness measurement for battery electrodes
One principal application is inline thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity affect energy density, internal resistance and long-term cell stability. SinceVision notes that offline contact micrometers or drop indicators can introduce operator variability and may deform wet or uncured electrode material. Periodic spot checks also cannot provide continuous coverage across a production reel, it says.
The proposed arrangement uses two synchronised sensors above and below a moving electrode web. Mounted on a calibrated, low-thermal-expansion marble gantry, the opposing heads measure clearance to the material; a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time. SinceVision reports production trials showing stable, repeatable measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling rate is intended to provide longitudinal resolution for detecting localised coating agglomerations, edge thinning and exposed substrate before cell winding.
Semiconductor and precision assembly uses
In semiconductor manufacturing, the non-contact sensor is intended for wafer position verification, edge detection, height measurement and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers. Its 50 kHz sampling rate is designed to capture transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range, with position data sent to machine controls over Ethernet for real-time monitoring and process control.
Jack Li, SinceVision’s global sales and marketing director, said false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He said conventional point-beam sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for manual inspection. The SGI-N030W’s expanded spot is designed to average out those variations, while opposing sensor heads support high-speed thickness verification.
